Causes And Countermeasures Of Concave Deformation Of Steel Drum Body In Production Process-2
Two, the softening of the steel plate itself is easy to cause the dent after the knock against the barrel
The defects of the physical and chemical mechanical properties of the steel plate itself (such as too low carbon content, excessive annealing, low yield strength, low tensile strength) cause the material "softening", which cannot meet the strength requirements of the steel barrel manufacturing, and the steel barrel is prone to dents after bumping.
In the process of production and use, if the steel plate "softening" phenomenon cannot meet the quality and performance needs of the steel barrel, you can entrust a qualified third-party inspection, as the basis of return or claim for compensation. In this way, the quality of the steel plate can be guaranteed and the steel barrel that meets the performance requirements can be manufactured.
New Confirmed Cases In Hangzhou, Zhejiang, ChinaJune 30, 2022On the morning of October 31st, a case of COVID-19 nucleic acid positive was detected in the forenoon of Hangzhou transit train from Hangzhou.Zhan, female, took G1382 train from Shangrao to Shanghai o...view
Standard For Use Of Steel Barrel Closures: Myers Container CompanyJuly 1, 20221. Closed system componentsIn order to ensure compliance with the UN requirements for the transportation of dangerous goods, the filler must inspect and re-tighten all applicable caps as needed before...view
Performance requirements of various parts of cold heading machineJuly 4, 2022(1) The connections between the crankshaft and the body and the impact connecting rod are all connected by high wear-resistant alloy copper tiles, which have large bearing capacity, long service life ...view