This table is the ISO recommended guide for the design of dimensions for a series of steel drums. The corresponding table of diameter and height series of steel drums with capacity from 2 litre to 220 litre is stipulated.
The upper part of the table is the diameter size of the steel drum, and the left part is the rated capacity of the steel drum, which has included 5% safety allowance in the steel drum. The middle part of the table shows recommended height values for steel drums corresponding to capacity and diameter.
This table can be used as a reference for the design and production of non - standard size steel drums in our country.
Short comment: The steel drum has various sizes, but with standard drum holes that fitted with 2inch and 3/4 inch steel drum closures.
Cold-rolled SteelJune 19, 2023Cold-rolled steel refers to steel produced through cold rolling. Cold rolling is the process of further rolling No.1 steel plate to the target thickness at room temperature. Compared with hot-rolled s...view
SWIFT Code Or IBAN?June 30, 2022Doing international trades may come down to bank transfer, which may need your bank SWIFT Code or IBAN. The two numbers are chosen among different regions across the world. The answer is as below:IBAN...viewThe Market Is Increasing, And The Development Of China's Steel Barrel Industry Is At The Right TimeJuly 1, 2022After talking about the steel drum itself, let's talk about industry production companies and industry chain dynamics. Due to the rapid development of the steel drum industry and the low requireme...view
Why Is Winter Bad For Coating ConstructionJune 30, 20221. Storage and transportation problemsFor liquid coatings, there will be a melting point problem, northern China in November basically fell below the freezing point, it is obvious that in this case, w...view
Heavy Rains in Texas Delay Plans To Boost Production At Hinton Steel PlantJuly 1, 2022The production ramp-up at Steel Dynamics Inc's (SDI) planned $1.9 billion Sinton, Texas, flat-rolled mill has been pushed back due to heavy flooding in the state.SDI detailed the delay in its seco...view
Specification For Cold Rolled Steel Plates For Steel DrumsJune 30, 2022European Steel Drum Manufacturers Association (SEFA) recommendationsThe proposal was developed by the European Steel Drum Manufacturers Association (SEFA) in collaboration with supplier members of the...view
EN
ko 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
th 
