Installation Procedure Of Closed Steel Drum Seal Cover
(1) Check all durm plugs to ensure that gaskets are in place and not distorted or damaged.
(2) Insert all the drum plugs clockwise and screw the threads by hand until they are tightened by hand.
(3) Verify and/or tighten all drum plugs to the minimum required specifications using calibrated torque wrenches. Note: Don't overtighten
(4) Wipe clean all spills or debris.
(5) Cover with applicable cap seal if necessary.
Short comments: Xuheng Metal provides various kinds of drum accessoires for global market, such as durm closure, metal drum cap seals, plastic cap seals, etc.
Issues and Technical Resolutions in Water-based Steel Drum PaintJuly 1, 20221. ShrinkageIn the process of painting or drying of the paint film, wrinkles or shrinkage and deformation appear on the surface of the topcoat. This kind of defect is the most common in alkyd paint re...view
Vale's Chief Executive Says Iron Ore Is Not In A SupercycleJuly 1, 2022Iron ore is not starting a new supercycle, according to Vale chief executive Eduardo Bartolomeo. In a FinancialTimes interview, the ceo estimates that demand will level off in two years.Bartolomeo say...view